Back to the product list

Your Toolkit Of Vacuum Experts

Model: Custom

Applications: Vacuum Packaging, Vacuum Furnaces, Chemical & Pharmaceutical Processing, Solvent Distillation/Vapor Recovery, Solvent Recovery, Crystallization, Transformer Oil Drying, Vapor Coating, Dryers & Evaporators, Semiconductor Processing, Dry Etching

Kinney application engineers are ready to help you select the best system and combinations of components for your specific needs. Custom engineered system solutions to 12,000 CFM are available with a combination of vacuum boosters/air ejectors and roughing pumps for any vacuum application. Contact your Kinney distributor or call 800-825-6937 for assistance.

Contact Us
Request a Quote Request Service, Parts or Support
Share

Booster Liquid Ring Vacuum Pump Systems

  • Ideal for pumping wet gas mixtures at low pressures
  • Oil-filled systems avoid problems with corrosive contaminants and sealant liquid vapor pressures at higher temperatures
  • Process liquid-filled systems prevent contamination of process gases with either water or oil

A variety of two and three-stage systems are available, complete with instrumentation, condensers, partial or complete sealant liquid recovery and recirculation, piping, and valves.

Booster Dry Screw Vacuum Pump Systems

  • Combine high pumping speed with deep vacuum levels and operate free of oil, water or other sealing liquids
  • Flows range to 4,500 CFM (7646 m3/h) with vacuum levels to 10 microns and below Complete engineered solutions are available and may include any combination of dry screw vacuum pumps, vacuum boosters, electric motors, direct of V-belt drive, coolant recirculation  systems, instrumentation, controls, skid piping and valves.

Booster Rotary Piston Vacuum Pump Systems

  • Pump high volumes at very low pressure
  • High-capacity dry rotary lobe vacuum booster is matched to a smaller rotary piston vacuum pump
  • For continuous operation below 1 Torr (1.3 mbar a), the vacuum booster can increase pumping speed by a factor of 10 or more
  • For operation at higher pressure and for faster evacuations, the booster may be approximately twice the capacity of the piston pump
  • Performance ranges 200-12,000 CFM (340-20,388 m3/h) with ultimate vacuum levels as low as 0.2 microns
  • Conventional systems with direct driven or V-belt driven boosters
  • Low-profile systems with close-coupled boosters are available
  • Creates a higher capacity system with economy of scale

Kinney application engineers can help you make the best selection for your specific needs.

Liquid Ring Vacuum Pump Systems

AF™ Engineered Liquid Ring Vacuum Systems are available from simple once-through designs to complete systems with receiver/separator tanks, control panels, vacuum boosters and full instrumentation.

Downloads

k-bc-fam

Brochure Download

k-bc-fam_es-mx

Brochure Download (ES-MX)

k-cs-ac-he_1st_3-21

Cut Sheet Download

k-cs-aerc_1st_3-21

Cut Sheet Download

k-cs-flex-connect_1st_3-21

Cut Sheet Download

1816-booster-vacuum-pumping-systems-rev-b-041921

Operator's Manual Download

4816-liquid-ring-vacuum-pumping-systems-drsp-drdp-ofrp-acrp-manual-rev-a-041921

Operator's Manual Download