PD Plus Blowers 3200
Model: 3202, 3204, 3206, 3210
Applications: Solvent Distillation/Vapor Recovery, Pneumatic Conveying, Carpet Cleaning, Air Sparging, Fluidization/Agitation of Dense Powders, Mobile Vacuum Waste Removal, Pulp/Paper Processing, Fluid Bed Combustion, Digester Gas Processing, Pressure Boosting, Oil-Free Handling Fuel, Utility or Process Gases, Laser Recirculation Systems, Closed Loop Pneumatic Conveying, Steam Compression, Soil Vapor Extraction, Process Gas Boosting
Max Vacuum: 15 in. Hg
Model 3200 PD Plus heavy duty industrial blowers are designed for high performance applications, up to 15 PSI pressure or 17” Hg dry vacuum (24” Hg water injected). All models have sight glasses as a standard feature.
Share
Standard Model This model’s applications include pneumatic conveying, wastewater treatment, and the general process industry where high pressure, high volume air is required. Seal areas are vented to atmosphere to relieve process pressure against the internal lip seals, and to provide oil-free air.
Single Envelope Gas Service This series is utilized in such applications as closed loop pneumatic conveying, process gas handling, or elevated pressure applications up to 100 PSIG discharge. Vent openings are tapped and plugged to prevent gas leakage. These fittings can also accept an inert gas purge for positive containment of the process gas.
Double Envelope Gas Service This series is built to laboratory standards where virtually complete sealing is required. In addition to the features shown on the Single Envelope Gas Service series, the drive shaft is mechanically sealed and the oil sumps are plugged to provide an even higher degree of leakage protection.
Features
Standard Model This model’s applications include pneumatic conveying, wastewater treatment, and the general process industry where high pressure, high volume air is required. Seal areas are vented to atmosphere to relieve process pressure against the internal lip seals, and to provide oil-free air.
Single Envelope Gas Service This series is utilized in such applications as closed loop pneumatic conveying, process gas handling, or elevated pressure applications up to 100 PSIG discharge. Vent openings are tapped and plugged to prevent gas leakage. These fittings can also accept an inert gas purge for positive containment of the process gas.
Double Envelope Gas Service This series is built to laboratory standards where virtually complete sealing is required. In addition to the features shown on the Single Envelope Gas Service series, the drive shaft is mechanically sealed and the oil sumps are plugged to provide an even higher degree of leakage protection.